Products
Hot bent glass - a unique and safe choice
Product DescriptionIntroduction
Product definition: Hot bent glass is a curved glass that is heated to a bending softening state by high-quality flat glass, formed in the mold, and then annealed.
Product characteristics
Aesthetics: there is no connection in the middle, beautiful lines, giving architecture and furniture a unique sense of art and modern atmosphere.
Specificity: Various irregular curved surfaces can be made according to demand, and composite products such as hollow and sandwich can also be produced to meet special shape needs.
Safety: strength increase, withstand a certain impact force, small fragments after crushing, vertical section, less sharp corners, reduce the risk of scratches and cuts.
Single bend: Hot bending is relatively easy, but the curve edge is about 150mm from the straight edge and the mold is often poorly fitted, affecting the installation. It is necessary to arrange the electric heating of the hot bending furnace reasonably to achieve local heating, and the product is placed in the same direction as the electric heating wire.
Bending: Common in aquarium and counter glass. The technical difficulty lies in the bending of the straight edge and the easy appearance of mold marks at the corner. Production requires a high level of hot bending operation and accurate mold, some of the need for professional hot bending furnace.
Composite bend: such as spherical glass, turning arch corridor, glass wash basin, etc. Very high requirements for hot bending technology, the need for accurate mold, part of the need for professional hot bending furnace.
Bending: Common in aquarium and counter glass. The technical difficulty lies in the bending of the straight edge and the easy appearance of mold marks at the corner. Production requires a high level of hot bending operation and accurate mold, some of the need for professional hot bending furnace.
Composite bend: such as spherical glass, turning arch corridor, glass wash basin, etc. Very high requirements for hot bending technology, the need for accurate mold, part of the need for professional hot bending furnace.
Ingredients: Suitable raw materials are selected according to design and process, mainly silica sand, sodium carbonate, limestone, etc.
Melting: The raw material is melted to soften at high temperature in glass melting kiln.
Molding: The liquid glass is extruded or stretched into the desired shape through the mold, and the temperature and pressure are controlled to ensure uniform deformation.
Annealing: Annealed in annealing furnace, compact internal structure, improve strength and stability.
Surface treatment: grinding and polishing as needed to improve the appearance quality.
Melting: The raw material is melted to soften at high temperature in glass melting kiln.
Molding: The liquid glass is extruded or stretched into the desired shape through the mold, and the temperature and pressure are controlled to ensure uniform deformation.
Annealing: Annealed in annealing furnace, compact internal structure, improve strength and stability.
Surface treatment: grinding and polishing as needed to improve the appearance quality.
When you are looking forward to purchasing laminated glass, be sure to sharpen your eyes and focus on whether the product has the 3C mark and relevant quality certification, which is the first threshold for quality assurance. At the same time, carefully screen the appearance quality to ensure that the surface is smooth, no bubbles, no defects. In the subsequent installation and use, there are also a series of precise and key points that need to be strictly followed, only in this way can we ensure that the laminated glass continues to bloom excellent performance in the long years, and escort your life and work.